Clean up ui.asm a little:

- "welcome" symbol removed
- refernces to 'welcome' for version checking replaced with references to versionNumber uint
- versionNumber added
- Other stuff.

zsnes/src/cpu/execute.asm

@@ -975,24 +975,10 @@ reexecuteb2:
     jnz near endprog
     jmp StartGUI
 
-SECTION .data
-NEWSYM EndMessage
-db '                                                                   ',13,10,0
-SECTION .text
-
 NEWSYM endprog
     call deinitvideo
 
     cmp byte[previdmode],3
-    jne .noendmessage
-    mov byte[EndMessage+13],','
-    mov eax,[welcome+9]
-    mov [EndMessage+9],eax
-    mov ax,[welcome+7]
-    mov [EndMessage+7],ax
-    mov edx,EndMessage
-    call PrintStr
-.noendmessage
 
 ;    mov eax,[opcd]
 ;    mov eax,[numinst]          ;Temporary

zsnes/src/gui/gui.asm

@@ -93,6 +93,7 @@ EXTSYM File_Seek,File_Seek_End,Open_File_Write,Get_Date,Check_Key,Get_Key
 EXTSYM Change_Drive,Change_Single_Dir,Change_Dir,Get_Dir,Get_First_Entry
 EXTSYM Get_Next_Entry,Set_DTA_Address,timer2upd,curexecstate,TripBufAvail
 EXTSYM nmiprevaddrl,nmiprevaddrh,nmirept,nmiprevline,nmistatus,spcnumread,spchalted
+EXTSYM versionNumber
 EXTSYM NextLineCache,VidStartDraw,ResetTripleBuf,GUINGVID
 EXTSYM ScanCodeListing,AdjustFrequency,GUISaveVars,Init_Mouse
 EXTSYM Get_MouseData,Set_MouseXMax,Set_MouseYMax,Set_MousePosition,Get_MousePositionDisplacement
@@ -104,7 +105,6 @@ EXTSYM printnum
 EXTSYM MMXCheck
 EXTSYM SaveCombFile
 EXTSYM NetSent,valuea
-EXTSYM welcome
 EXTSYM showinfogui
 EXTSYM BackupCVFrame, tempedx, tempesi, tempedi, tempebp
 EXTSYM Wait1SecWin,ClearUDPStuff

zsnes/src/gui/guimisc.inc

@@ -81,7 +81,7 @@ MovieRecord:
 .noappend
     mov al,[soundon]
     mov [RecData],al
-    mov eax,[welcome+8]
+    mov eax,[versionNumber]
     mov [RecData+1],eax
     mov byte[RecData+2],1
     mov eax,[timer2upd]

zsnes/src/gui/guinetpl.inc

@@ -530,13 +530,14 @@ SECTION .text
     call RemoteSendChar
     mov al,222
     call RemoteSendChar
-    mov al,[welcome+7]
+	 ; Dan - Change this from looking into the welcome message forthe version.
+	 mov al,[versionNumber + 0]
 	 call RemoteSendChar
-    mov al,[welcome+9]
+	 mov al,[versionNumber + 1]
 	 call RemoteSendChar
-    mov al,[welcome+10]
+	 mov al,[versionNumber + 2]
 	 call RemoteSendChar
-    mov al,[welcome+11]
+	 mov al,[versionNumber + 3]
 	 call RemoteSendChar
     mov al,[soundon]
     call RemoteSendChar
@@ -580,28 +581,28 @@ SECTION .text
 .nocheck3
     cmp byte[IDCheckPos],3
     jne .nocheck4
-    cmp dl,[welcome+7]
+    cmp dl,[versionNumber + 0]
     jne near .invversion
     mov byte[IDCheckPos],4
     ret
 .nocheck4
     cmp byte[IDCheckPos],4
     jne .nocheck5
-    cmp dl,[welcome+9]
+    cmp dl,[versionNumber + 1]
     jne near .invversion
     mov byte[IDCheckPos],5
     ret
 .nocheck5
     cmp byte[IDCheckPos],5
     jne .nocheck6
-    cmp dl,[welcome+10]
+    cmp dl,[versionNumber + 2]
     jne .invversion
     mov byte[IDCheckPos],6
     ret
 .nocheck6
     cmp byte[IDCheckPos],6
     jne .nocheck7
-    cmp dl,[welcome+11]
+    cmp dl,[versionNumber + 3]
     jne .invversion
     mov byte[IDCheckPos],9
     ret

zsnes/src/init.asm

@@ -25,7 +25,7 @@ EXTSYM makesprprtable,romloadskip,start65816,startdebugger,SfxR0
 EXTSYM MovieProcessing
 EXTSYM MovieFileHand,filefound,inittable,SA1inittable
 EXTSYM MessageOn,Msgptr,MsgCount,sndrot,GenerateBank0Table,SnowTimer
-EXTSYM inittableb,inittablec,newgfx16b,cfgreinittime,EndMessage
+EXTSYM inittableb,inittablec,newgfx16b,cfgreinittime
 EXTSYM Open_File,Read_File,Write_File,Close_File,Output_Text,Get_Key,CNetType
 EXTSYM Delete_File,Get_First_Entry,Get_Next_Entry,Change_Dir,InitDSP
 EXTSYM Remove_Dir,Change_Single_Dir,Create_Dir,Get_Memfree,Create_File
@@ -322,7 +322,9 @@ NEWSYM init
     mov byte[newengen],1
     mov byte[cfgnewgfx],1
 .noforce
-
+	; Dan - I don't know what this is, but all it seems to do is update
+	; EndMessage which I've nuked.
+%if 0
     mov ebx,ebm
     mov eax,EndMessage
     mov dh,17h
@@ -344,7 +346,7 @@ NEWSYM init
     inc ebx
     dec ch
     jnz .loopen
-
+%endif
 
     cmp byte[yesoutofmemory],1
     jne .noout

zsnes/src/ui.asm

@@ -20,11 +20,11 @@
 
 %include "macros.mac"
 
-EXTSYM getcfg,soundon,SBHDMA,StereoSound,init,GUIRestoreVars,GUIClick,MouseDis
-EXTSYM ConvertJoyMap,ConvertJoyMap1,ConvertJoyMap2,printhex,InitSPC
+EXTSYM getcfg,SBHDMA,StereoSound,init,GUIRestoreVars,GUIClick,MouseDis
+EXTSYM ConvertJoyMap,ConvertJoyMap1,ConvertJoyMap2,printhex
 EXTSYM StartUp,PrintStr,WaitForKey,PrintChar,ZFileSystemInit
-EXTSYM SPCDisable,SystemInit,allocmem
-EXTSYM FPSOn,FPSAtStart,cfgsoundon
+EXTSYM SystemInit,allocmem
+EXTSYM cfgsoundon
 EXTSYM xa
 EXTSYM ram7fa,wramdataa
 EXTSYM malloc,free
@@ -42,18 +42,14 @@ EXTSYM frameskip,BitConv32Ptr,spcBuffera,spritetablea,vcache2bs
 EXTSYM vcache4bs,vcache8bs,RGBtoYUVPtr,newgfx16b,vidbuffer,vidbufferofsa
 EXTSYM vidbufferofsmos,ngwinptr,vidbufferofsb,headdata,romdata,sfxramdata
 EXTSYM setaramdata,wramdata,ram7f,vram,sram,debugbuf,regptr,regptw,vcache2b
-EXTSYM vcache4b,vcache8b,fname,fnames,fnamest,filefound,vidbufferofsc,DSPDisable
-EXTSYM gammalevel,gammalevel16b,Sup48mbit,Sup16mbit,guioff
+EXTSYM vcache4b,vcache8b,fname,fnames,fnamest,filefound,vidbufferofsc
+EXTSYM Sup48mbit,Sup16mbit,guioff
 
 %ifdef __LINUX__
 EXTSYM LinuxExit
 EXTSYM GetFilename
 %endif
 
-%ifdef OPENSPC
-EXTSYM OSPC_Init
-%endif
-
 ; Function 0501h
 ; User Interface
 
@@ -71,16 +67,6 @@ SECTION .data
 NEWSYM mydebug, db '',13,10,0
 NEWSYM outofmem, db 'You don',39,'t have enough memory to run this program!',13,10,0
 
-NEWSYM welcome
-  db 'ZSNES v',ZVERSION,' (c) 1997-2005, ZSNES Team',13,10,13,10
-  db 'Be sure to check http://www.zsnes.com/ for the latest version.',13,10
-  db 'Please report crashes to zsnes-devel@lists.sourceforge.net.',13,10,13,10
-  db 'ZSNES is written by the ZSNES Team (See AUTHORS.TXT)',13,10
-  db 'ZSNES comes with ABSOLUTELY NO WARRANTY.  This is free software,',10,13
-  db 'and you are welcome to redistribute it under certain conditions;',10,13
-  db 'please read ',39,'LICENSE.TXT',39,' thoroughly before doing so.',10,13,10,13
-  db 'Use ZSNES -? for command line definitions.',13,10,13,10,0
-
 ;cpuidfname db 'nocpuzid.dat',0
 ;cpuidtext db 'NOTE: If ZSNES crashes here, then please re-run. ',0
 ;cpuidtext2 db 13,'                                                 ',13,0

zsnes/src/uic.c

@@ -199,6 +199,7 @@ extern unsigned char spcon;
 extern unsigned char FPSOn;
 extern unsigned char FPSAtStart;
 
+const unsigned int versionNumber = 0x00000143;
 const char* ZVERSION = "Pre 1.43";
 
 void zstart ()